css/pictdesc.txt
DCP01652.JPG Front of Original Apex AD-500W.
DCP01654.JPG Rear of Original Apex AD-500W.
DCP01655.JPG Upper Left, Power Supply. Upper Right, I-O Board. Center, DVD-Rom.
Bottom-Left, AT Power Switch. Bottom-Right, Main Processor Board.
DCP01656.JPG After removal of the DVD-Rom.
DCP01657.JPG Back of the original DVD Rom. Note the IDE Connection and AT power.
DCP01658.JPG Power Supply Removed.
DCP01659.JPG I-O Board and Main Processor Board removed.
DCP01660.JPG Empty shell, ready to be modified for new components.
DCP01661.JPG ATX Rear Plate mounted, after cutting out rectangular hole.
DCP01662.JPG Another angle of ATX Rear Plate, with motherboard in place.
DCP01663.JPG Motherboard dry-fitted to mark screw holes.
DCP01664.JPG Mounting angle made using truss plates from home center.
DCP01665.JPG USB Card Reader on mounting brackets, dryfitted to mark screw holes.
DCP01666.JPG Screw holes completed. Note where a factory standoff had to be removed.
DCP01667.JPG All new components securely mounted.
DCP01668.JPG Components mounted, devices are cabled, RAM is inserted.
DCP01669.JPG Almost ready for power-up. Notice stock power switch is still in place.
DCP01681.JPG Modified Power Switch.DCP01654.JPG
Array
(
[0] => Array
(
[0] => DCP01652.JPG
[1] => Front of Original Apex AD-500W.
)
[1] => Array
(
[0] => DCP01654.JPG
[1] => Rear of Original Apex AD-500W.
)
[2] => Array
(
[0] => DCP01655.JPG
[1] => Upper Left, Power Supply. Upper Right, I-O Board. Center, DVD-Rom.
Bottom-Left, AT Power Switch. Bottom-Right, Main Processor Board.
)
[3] => Array
(
[0] => DCP01656.JPG
[1] => After removal of the DVD-Rom.
)
[4] => Array
(
[0] => DCP01657.JPG
[1] => Back of the original DVD Rom. Note the IDE Connection and AT power.
)
[5] => Array
(
[0] => DCP01658.JPG
[1] => Power Supply Removed.
)
[6] => Array
(
[0] => DCP01659.JPG
[1] => I-O Board and Main Processor Board removed.
)
[7] => Array
(
[0] => DCP01660.JPG
[1] => Empty shell, ready to be modified for new components.
)
[8] => Array
(
[0] => DCP01661.JPG
[1] => ATX Rear Plate mounted, after cutting out rectangular hole.
)
[9] => Array
(
[0] => DCP01662.JPG
[1] => Another angle of ATX Rear Plate, with motherboard in place.
)
[10] => Array
(
[0] => DCP01663.JPG
[1] => Motherboard dry-fitted to mark screw holes.
)
[11] => Array
(
[0] => DCP01664.JPG
[1] => Mounting angle made using truss plates from home center.
)
[12] => Array
(
[0] => DCP01665.JPG
[1] => USB Card Reader on mounting brackets, dryfitted to mark screw holes.
)
[13] => Array
(
[0] => DCP01666.JPG
[1] => Screw holes completed. Note where a factory standoff had to be removed.
)
[14] => Array
(
[0] => DCP01667.JPG
[1] => All new components securely mounted.
)
[15] => Array
(
[0] => DCP01668.JPG
[1] => Components mounted, devices are cabled, RAM is inserted.
)
[16] => Array
(
[0] => DCP01669.JPG
[1] => Almost ready for power-up. Notice stock power switch is still in place.
)
[17] => Array
(
[0] => DCP01681.JPG
[1] => Modified Power Switch.
)
)
A "lot" of "stuff"